Incoloy Alloy 800/800HT/825 Pipes & Tubes
Incoloy Alloy 800/800HT/825 Seamless Welded Pipes And Tubes | ASTM B163 Incoloy UNS N08800/11/25 Seamless & Welded Pipes & Tubes
Incoloy 800 Seamless Pipes And Tubes | Incoloy 800HT Seamless Pipes And Tubes | Incoloy 825 Seamless Pipes And Tubes
Jainex Metal is a prestigious association that is moderately occupied with offering an extensive variety of Incoloy 800/800HT/825 Pipes and Tubes. Offered by us, these Incoloy 800/800HT/825 Pipes and Tubes are to a great degree refreshing among our supporters for their rich elements, for example, corrosion resistant, high tensile strength, robust design, flawless finish and durability.
With the end goal of keeping up the most ideal quality, we have set up a very much prepared in-house quality testing unit. As a maker, supplier, stockiest and exporter, we offer these Inconel Alloy 800/800HT/825 pipes and tubes in specially crafted sizes and thicknesses, according to the careful requests of our regarded customers. We offer these UNS N08800/11/25 Pipes and Tubes in worldwide and national nature of benchmarks at practical rates to our supporters.
Specification Of Incoloy Alloy 800/800HT/825 Seamless Welded Pipes And Tubes
| Grade | Incoloy 800/ 800H/ 800HT/ 825 (UNS N08800/ 11/ 25) |
|---|---|
| Size | ½”NB – 24”NB |
| Schedule | SCH 10 – SCH XXS |
| Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Standards | ASTM B407, ASTM B163, ASTM B358, ASTM B515, ASME SB407, ASME SB163, ASME SB358, ASME SB 515 |
| End | Plain End, Beveled End, Threaded. |
| Length | Single Random, Double Random & Cut Length. |
| Form | Round, Square, Rectangular, Hydraulic Etc. |
Chemical Composition Of Incoloy Alloy 800/800HT/825 Seamless Welded Pipes And Tubes
| Incoloy | 800 | 800H | 825 |
|---|---|---|---|
| Ni | 30-35 | 30-35 | 38.0 – 46.0 |
| Fe | 39.5 min | 39.5 min | 22.0 min |
| Cr | 19-23 | 19-23 | 19.5 - 23.5 |
| Cu | 0.75 max | 0.75 max | 1.5 - 3.0 |
| Ti | 0.15-0.60 | 0.15-0.60 | 0.6 - 1.2 |
| Al | 0.15-0.60 | 0.15-0.60 | 0.2 max |
| C | 0.1 max | 0.05-0.1 | 0.05 max |
| Mn | 1.5 max | 1.5 max | 1.0 max |
| S | 0.015 max | 0.015 max | 0.015 max |
| Si | 1.0 max | 1.0 max | 0.5 max |
| Mb | - | - | 2.5 - 3.5 |
Mechanical Properties Of Incoloy Alloy 800/800HT/825 Seamless Welded Pipes And Tubes
| Inconel 800/800HT | |
|---|---|
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa –205 |
| Elongation | 30 % |
| Inconel 825 | |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa –220 |
| Elongation | 30 % |
Physical Properties of Incoloy 800/800HT
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F |
Physical Properties of Incoloy 825
| Density | 8.14 g/cm3 |
|---|---|
| Melting Point | 1400 °C (2550 °F) |