Inconel Alloy 600/601/625/718 Pipes & Tubes
Inconel Alloy 600/601/625/718 Seamless Welded Pipes & Tubes | ASME SB-775 Inconel UNS N06600/01/25 N07718 Seamless & Welded Pipes & Tubes
Inconel Alloy 600/601/625/718 Pipes And Tubes Manufacturer | Inconel Alloy Seamless Welded Pipes And Tubes Exporter
Jainex Metal is a prestigious association that is generally occupied with offering an extensive variety of Inconel 600/601/625/718 Pipes and Tubes. These UNS N06600/N06601/N06625 Pipes and Tubes hold strength over a broad temperature range, striking for high-temperature capacities where steel and aluminum would respect creep in view of thermally induced precious stone opening.
WNR 2.4816/2.4851/2.4856 Pipes and Tubes is basic in gas turbine edges, seals, and combustors, and in addition turbo charger rotors and seals, electric submersible well pump engine shafts, high temperature latches, etc. As a producer, supplier, stockiest and exporter, we offer these Inconel Alloy 600/601/625 Pipes and Tubes in uniquely crafted sizes and thicknesses, according to the precise requests of our regarded customers. We offer the same in worldwide and national nature of guidelines at practical rates to our supporters.
Specification
| Grade | UNS N06600/01/25, UNS NO7718 |
|---|---|
| Size | ½”NB – 24”NB |
| Schedule | SCH 10 – SCH XXS |
| Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Standards | ASME SB-167 ASME SB-829 ASME SB-775 ASME SB-725 |
| End | Plain End, Beveled End, Threaded |
| Length | Single Random, Double Random & Cut Length. |
| Form | Round, Square, Rectangular, Hydraulic Etc. |
Chemical Composition
| Grade | Ni | Fe | C | Mn | Si | Cu | Cr | S | Mo | Co | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 600 | 72.0 min | 6.0 - 10.0 | 0.15 | 1.0 | 0.5 | 0.5 | 14.0 - 17.0 | 0.015 | - | - | - | - |
| 601 | 58.0 – 63.0 | Balance | 0.10 | 1.0 | 0.50 | 1.0 | 21.0 – 25.0 | 0.015 | 8.0-10.0 | - | 1.0 – 1.7 | - |
| 625 | Remainder | 5.0 | 0.10 | 8.0-10.0 | 0.50 | - | 20.00-30.00 | 0.015 | 8.0-10.0 | 1.0 | 0.40 | 0.40 |
| 718 | 50.00-55.00 | Remainder | 0.08 | 0.35 | 0.35 | 0.30 | 17.00-21.00 | 0.015 | 2.80-3.30 | - | 0.20-0.80 | 0.65-1.15 |
Mechanical Properties of Inconel 600/601
| Grade | Tensile (psi) | .2% Yield (psi) | Elongation (%) |
|---|---|---|---|
| 600 | 95,000 | 45,000 | 40 |
| 601 | 80,000 | 30,000 | 35 |
| 718 | 180,000 | 150,000 | 12(min) |
Mechanical Properties of Inconel 625
| Temp° F | Tensile (psi) | .2% Yield (psi) | Elongation in 2 “ (%) |
|---|---|---|---|
| 70 | 144,000 | 84,000 | 44 |
| 400 | 134,000 | 66,000 | 45 |
| 600 | 132,000 | 63,000 | 42.5 |
| 800 | 131,500 | 61,000 | 45 |
| 1000 | 130,000 | 60,500 | 48 |
| 1200 | 119,000 | 60,000 | 34 |
| 1400 | 78,000 | 58,500 | 59 |
| 1600 | 40,000 | 39,000 | 117 |
Physical Properties of Inconel 600
| Density | 8.47 g/cm3 |
|---|---|
| Melting Point | 1413 °C (2580 °F) |
Physical Properties of Inconel 601
| Density | 8.1 g/cm cube |
|---|---|
| Specific Heat | 461 J/kg K |
| Electrical Resistivity | 119 micro ohms cm |
| Curie Temperature | -190 C |
| Melting Range | 1320 - 1370 C |
| Thermal Expansion(10-6K) | 14.9 (20-300 C) |
Physical Properties of Inconel 625
| Density (Kg.m-1) | 84.4 |
|---|---|
| Magnetic Permeability (20°C) | <1.001 |
| Curie Temperature (°C) | -160 |
| Young’s Modulus (N/mm2) | 205 x 10 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 410 |
| Specific Electrical Resistance, 20°C (?O.m) | 1.29 |
| Thermal conductivity,20°C (W.m-1.°K-1) | 9.9 |
| Mean coefficient of thermal expansion, 20-100°C (°K-1) | 12.8 x 10 |
Physical Properties of Inconel 718
| Solution Treated | Solution Treated and Aged | |
|---|---|---|
| Density | 0.296 lb/in3 (8.192 g/cm3) | 0.297 lb/in3 (8.22 g/cm3) |
| Specific Gravity | 8.19 | 8.22 |
| Melting Range | 2500-2600°F | 1370-1430°C |